Xiaomi Mi Electric Scooter 1S

Prix régulier $810.00 Prix réduit $675.00 Épargnez $135.00
/
Taxes incluses. Frais d'expédition calculés lors du passage à la caisse.

 

Ride your last mile with the Mi Electric Scooter 1S, implemented with a new generation energy recovery system. It is all about bringing you joy but also cares for your safety, allowing you to ride to your heart’s content.

  • 30KM battery life

  • Max 25KM/H

  • Smart Display

  • Dual braking system

  • 500W Motor

  • Management System

  • Mijia APP Control

  • Skid-resistant and shock-absorbing tires

  • Aluminium alloy body

 Xiaomi Mi Electric Scooter 1S | eRider.com.au

Xiaomi Mi Electric Scooter 1S | eRider.com.au

Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au
Xiaomi Mi Electric Scooter 1S | eRider.com.au

 

DIMENSIONS
Dimensions (unfolded)
Height: 1140mm
Width: 1080mm
Dimensions (folded)
Height: 490mm
Width: 1080mm
Depth: 430mm
BASIC SPECS
Range: 30km
Package weight: 20.5300 kg
Gradeability: 14%
Rated power: 250W
Tires: 8.5" front and rear
pneumatic tires
Controller current limit: 17A±0.5A
Rider age: Age 16-50
Storage temperature: -20°C to 45°C
Charging time: 5.5 hours
Max. speed: 25km/h (Max speed for each mode: Pedestrian mode: 5km/h;
D: 20km/h; S: 25km/h)
Weight: 12.5kg
Braking: E-ABS and disc brake
Max. power: 500W
Controller under voltage
protection:
29V±0.5V
Motor type: Brushless DC motor
Rider height: 120cm-200cm
Working temperature: -10°C to 40°C
IP-rating: IP54
BATTERY SPECS
Battery type: Lithium ion battery
Maximum charging voltage: 42VDC
Discharge temperature
range:
-20°C~+50°C
Cyclical lifetime: 500 charging cycles with power
maintained above 70%
Battery model: NE1003-H
Rated voltage: 36VDC
Charging temperature
range:
0°C~+40°C
Battery weight: 1.6kg
ADAPTER SPECS
Output power: 71W
Input current: 2A MAX
Output current: 1.7A
Input voltage: 100-240VAC 50/60Hz
Output voltage: 42V
DC cable length: 2m
DC cable port type: Custom Φ8.0*1.6mm
PACKAGE CONTENT
Package Content: Mi Electric Scooter 1S x1
Power adapter x1
Hexagon wrench x1
Extended nozzle adapterX1
Screws x5
Tire x 1
User manual
Important information
Specifications

*The battery was tested fully charged, with a 75kg load, at 25°C, with no wind on a level road in pedestrian mode at a uniform velocity of 15km/h. Actual results may vary based on differences in temperature, load, wind speed, road conditions and other factors.

*Interactive indication: In the off state, short press to start. Short press once at power-on state to turn on/off the lights; short press twice in succession to switch the speed mode; long press to turn off.

*It is not recommended to use cruise control in areas with heavy traffic, or during or after precipitation.

*All above data was obtained from Ninebot labs. Actual results may vary based on differences in use conditions.

*Before purchasing, please carefully read the Mi Electric Scooter 1S user manual and legal notice. Be sure to abide by local laws and regulations when using Mi Electric Scooter 1S.

*The laws regarding the use of electric scooters vary between states/territories. Public use isn't permitted in all states/territories and licensing/registration requirements may apply. Customers should review these laws before purchasing an electric scooter. Safety equipment (including helmets and protective gear) should always be worn when using electric scooters.

*Any firmware modifications or any alterations unintended by the manufacturer may result in overheating or electrical failure and will result in a void of warranty.